We finally added some stalls to our goat barn. Kate came up with the basic design and I sort of pieced it together in late October. It’s two stalls and a corral, built with treated 4x6s and 2x8s for the sides. I’d say both stalls are big enough for a horse, although one is pushing the limits. It’d be fine for a large horse that’s lame and needs to be rested for a few days, but long term it might be cramped.
The sheep currently occupy the stalls and buying a horse is certainly not on our to-do list, so I think they’ll serve us well. Goats or pigs are more likely tenants than horses for now. I’m not sure this really requires a step-by-step. It’s two squares framed off of the barn walls so everyone’s would be slightly different depending on the dimensions of your pole barn. But here’s a few tips and “how I did-its.”
The labor was intensive… I set the posts using a hand auger. It went through the gravel bottom OK, but after drilling over 10 of them, I’ll admit I was pooped.
Things got a little tricky because of the concrete foundation, so I did get a little creative in a few spots. Personally, I’m most proud of the gates, which I built from scratch out of 2x4s. I used deck screws in pocket holes to frame them out and covered with 2x6s. They’re surprising light and function well. If I can find the photos, I will do a step-by-step on the gates. The design would work for fences, decks, etc.
I really enjoyed this project, as I always do when I get to try my hand at carpentry. I kick myself I didn’t pursue carpentry as a career, I enjoy it more than anything else in the world. Maybe someday. Luckily there is plenty of it to do around here for now. I finished the two 10’x10′ stalls and will finish the smaller pens this spring/summer. But for now, here is a glance at our new stalls and happy sheep!